INA BCH1616 Needle bearing

T max.:100 °C; A:6.7 mm; C0:4.78 kN; H:81 mm; A2:16 mm; Designation of housing:PF203-; T min.:-40 °C; J:63.5 mm; S:6 mm; B:22 mm;

Nlim (grease):7,000 rpm; Characteristic outer ring frequency, BPF0:3.06 Hz; Enclosure:2 Metal Shields; Inch - Metric:Metric; Noun:Bearing; Inner Race Width:0 Inch | 0 Millimete; Keyword String:Ball; Minimum Buy Quantity:N/A; Weight / Kilogram:0; UNSPSC:31171504;

Inside Ring Outside Diameter:169 mm; d:140 mm; Fillet Radius/Chamfer:3 mm; Da (max):236 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:3,000 rpm; r1:3 mm; Dynamic Load Rating:310,000 N; Enclosure:Open; Radial Clearance:0.100 to 0.145 mm;

S:12 mm; d1:74.5 mm; Weight:3.51 kg; Designation of housing:FE211N-; A1:15 mm; Dz:110 mm; N:18mm; L:162 mm; e:31 mm; Designation of open end cover:SCOE211-55;

ra max:2 mm; Fatigue limit load, Cu:76.6 kN; Y1:2.55; D:225 mm; Associated sleeve reference:H3128; Nlim:2,800 rpm; Min operating temperature, Tmin:-40 °C; Mass:10.77 kg; Nref:2,200 rpm; Max operating temperature, Tmax:200 °C;

e:18 mm; Designation of bearing:UC306G2; Designation of housing:FL306-; s1:21.5 mm; T min.:-20 °C; T max.:100 °C; N:23mm; Recommended tightening torque for set screw:5.5 Nm; d:30 mm; J:134 mm;

A:21 mm; C:14 kN; B:27 mm; s1:13.5 mm; L:264 mm; G:R1/8"; L1:225 mm; C0:7.88 kN; Designation of housing:SP203-205/52N-; T max.:100 °C;

A2:31.5 mm; Weight:0.47 kg; Designation of open end cover:SCO204-20; d:20 mm; e:15 mm; Adapter sleeve reference:HLK2304; Dz:54 mm; d1:32 mm; C0:6.6 kN; Designation of bearing:LK204G2H;

Weight:1.77 kg; d:35 mm; S:9.5 mm; d1:51.1 mm; A:34 mm; A4:26 mm; B:25.4 mm; H3:90; e:11 mm; G:M6x1;

A1:10 mm; L:60.5 mm; G:R1/8"; B:31 mm; S:12.7 mm; A:32 mm; e:19 mm; T max.:100 °C; s1:15.5 mm; Designation of bearing:UC204G2L3;

J:89.2 mm; A:21.1 mm; C0:11.2 kN; N:8,7mm; H:114.3 mm; L:203.2 mm; Designation of housing:PFE206-; B:30 mm; s1:15 mm; d:30.16 mm;

A1:36 mm; Weight:3.94 kg; d:60 mm; Z:90 mm; L1:52 mm; A:68 mm; L:150 mm; Designation of open end cover:SCO212-60; J:114 mm; Designation of housing:PA212N-;

A5:18.2 mm; Recommended tightening torque for set screw:5.5 Nm; Z:70.7 mm; A:37 mm; d1:44.1 mm; H1:89 mm; A2:28 mm; T min.:-20 °C; s1:34.1 mm; G:M6x1;

A:43 mm; C0:29.2 kN; B:55.6 mm; T max.:100 °C; Designation of housing:F211N-; Weight:3.43 kg; S:22.2 mm; N:19mm; T min.:-20 °C; A2:58.4 mm;

Mass:0.04 kg; Da max:28 mm; Characteristic rolling element frequency, BSF:3.71 Hz; rs min:0.6 mm; da max:17 mm; Static load, C0:2.75 kN; Min operating temperature, Tmin:-25 °C; D:32 mm; Characteristic outer ring frequency, BPF0:2.62 Hz; d:12 mm;